Q-Logic 8200 Manuel D’Utilisation

10–Converged Network Adapter Interactive Commands

Read Write Buffer Test

SN0054667-00  C

10-119

7. Read Write Buffer Test<port selection>1. FCoE3. Configure Test Parameters

From the Read Write Buffer Test menu, select the Configure Test Parameters 
option to open a read write buffer test submenu with options to configure the data 
patterns, data size, number of tests, test increments, error handling, and loopback 
type. For details about these parameters, refer to 

. For example:

   Loopback Test
=======================================================
CNA           : 0 Port: 1
SN            : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model     : QLE8242
CNA Desc.     : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version    :
WWPN          : 21-00-00-0E-1E-04-95-EB
WWNN          : 20-00-00-0E-1E-04-95-EB
Link          : Online
=======================================================
    1:  Data Patterns
    2:  Data Size
    3:  Number Of Test(s)
    4:  Test Increment(s)
    5:  Abort On Error
    6:  Enable/Disable Device(s)

7. Read Write Buffer Test<port selection>1. FCoE4. Start Diagnostics Test

From the Read Write Buffer Test menu, select the Start Diagnostics Test option 
to start the read write buffer test.

4. Adapter Diagnostics1. Converged Network Adapter7. Read Write Buffer Test<port selection>2. iSCSI

This option is currently not supported.