Q-Logic 8200 Manuel D’Utilisation

4–NIC Noninteractive Commands
-link (Display Physical Link Status)

4-10

SN0054667-00  C

For example:

> qaucli -pr nic -iset 1

=== Configured Port Settings for 1. CNA Port Index ===
Header_Data_Split_Enable           : off
IPv4_Large_Send_Offload_v1_Enable  : on
IPv4_Large_Send_Offload_v2_Enable  : on
IPv6_Large_Send_Offload_v2_Enable  : on
IPv4_TCP_Checksum_Offload_Enable   : RxTx
IPv6_TCP_Checksum_Offload_Enable   : RxTx
IPv4_UDP_Checksum_Offload_Enable   : RxTx
IPv6_UDP_Checksum_Offload_Enable   : RxTx
Jumbo_Frames_MTU_9000_Enable_Rx    : off
Jumbo_Frames_MTU_9000_Enable_Tx    : off
LOCAL_Administered_Address_MAC     : 00:c0:dd:12:0f:f4
MAC_Address_Alias                  : paul
Receive_Side_Scaling_Enable        : on
Receive_Ring_Size                  : 0
Transmit_Ring_Size                 : 0
PromiscuousModeEnabled             : off

To view the status of the physical link, including the port speed, issue the -link 

command as follows:

> qaucli -pr nic -link [cna_port_inst]

For example:

> qaucli -pr nic -link 1

=== Physical Link Status for 1. CNA Port Index ===
Link Status          : Up
Port Speed           : 10 Gbps