Q-Logic 8200 Manuel D’Utilisation

5–Fibre Channel Noninteractive Commands
-fg (Show Driver Settings)

5-12

SN0054667-00  C

3.

Issue the qaucli -pr fc command with the -f option (input from 

command file):

# qaucli -pr fc -f setadapter0.txt
# qaucli -pr fc -f <file name>

QConvergeConsole CLI specifies command line input from file.

To show the driver settings, issue the following command:

# qaucli -pr fc -fg (<hba instance> | <hba wwpn>) (view | info)

Where:

Type the following command to configure the driver settings:

# qaucli -pr fc -fs (<hba instance> | <hba wwpn>) {(<param name> | 
<param alias>) <param value>}

Where:

The pairs <param name> <param value> and <param alias> <param value> can 
be repeated to set multiple parameters in a single command.

 lists the driver configuration parameter names and aliases.

The -fg option is valid only in noninteractive mode.
The -fg option is not supported for Linux/Solaris.

hba instance = Adapter number (use -g command to find)

hba wwpn = World wide port name of the adapter

hba instance = Adapter instance number of an adapter port (use -g 

command to find)

hba wwpn = World wide port name of the adapter

param name = Name of the parameters

param alias = Alias of the parameters

param value = New value of the parameters