iHome iBN180 Manuel D’Utilisation

Setting and Using FM Presets

The unit allows you to store up to 6 FM radio station presets
1.  Press the     Button on the unit to turn it on.
2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio 

frequency appear on the display.

3.  Press and release the      Presets Button as needed until the preset number (P1- P6) you wish to set is 

displayed, then press and hold the      Presets Button to enter setting mode.

4. Press 

the 

– or + Buttons to tune the radio to the desired station (hold to scan for the next clear station).

5. Press 

and 

release 

the 

     Presets Button to confirm. 2 beeps will sound to confirm the preset has been 

assigned. Continue steps 3 - 5 until you have set up to 6 preset stations.

6.  To listen to a preset FM station at any time, follow steps 1 - 3 to turn on FM radio mode and cycle to 

the desired preset. NOTE: If no Bluetooth device is linked/paired, pressing the      Presets Button when 
the unit is OFF will turn the unit ON in the last active mode.

Using FM Radio in Other Countries

Different areas of the world use different FM frequency steps and ranges. By default, this unit is set 
to USA frequency steps. To use the radio outside the USA:
1.  Make sure unit is OFF.
2.  Press and hold the Mode Button until “USA” flashes in the display.
3.  Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA.
4.   Press the Mode Button again to exit frequency setting mode. 2 beeps will confirm setting.

Using the 

iBN180

9

P10

Using the 

iBN180

10

P11

Setting and Using the Alarms

This unit has 2 separate alarms, each set the same way. Below we explain how to set Alarm 1.
To set alarm 2, follow the same steps using the Alarm 2 Button.
Note: each step must be completed while display is flashing or step will time-out with any changes saved.
1.  Press and hold the Alarm 1 Button for 2 seconds until the time display and alarm icon flash.
2.  Press the  –  or  +   Buttons to adjust the alarm time to the desired time (hold for rapid setting).
 

Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear on the left of the 
display. 

3. Press the Alarm 1 Button to confirm the alarm time setting. The wake-to source will flash.
4.  Press the  –  or  +   Buttons to select the desired wake to alarm source: Bluetooth, radio or tone.
Wake to Bluetooth: 

You will wake to the currently linked Bluetooth device. If no device is detected, the 
alarm will default to current Tone.

Wake to Radio: Press 

the 

Alarm 1 Button to confirm. Press the      Presets Button to select an FM 

preset to wake to, or press the  –  or  + Buttons to tune in a desired wake to 
station.

Wake to Tone: Press 

the 

Alarm 1 Button to confirm. Press the  –  or  +   Buttons to select one of the 

four built-in wake-to tones.

5. Press the Alarm 1 Button to confirm the alarm source. The volume display will flash. 
6. Press the    or     Buttons to adjust the alarm volume on the unit from 05 - 40. Note that the alarm volume 

setting is stored separately from other volume settings.

7. Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm 

clock setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.