iHome iBN180 Manuel D’Utilisation
Using the
iBN180
Using the
iBN180
Pairing Your Device
Using Standard Bluetooth
Using Standard Bluetooth
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user
manual.
2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes
on the display and a beep sounds, indicating pairing attempt. “iHome iBN180” should appear on
your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome
iBN180” on the device to connect it. If your device asks for a password, enter 1234 on the keyboard
of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its
previous mode. To retry pairing, turn the unit OFF then back ON, then follow step 2 again.
your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome
iBN180” on the device to connect it. If your device asks for a password, enter 1234 on the keyboard
of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its
previous mode. To retry pairing, turn the unit OFF then back ON, then follow step 2 again.
3. Once paired with a device, the Bluetooth indicator on the display will stop flashing then the Bluetooth
icon will remain. On some devices, you must then select “Use as Audio Device” or similar on the device’s
Bluetooth menu. Once paired, your device should link to the iBN180 whenever within range (about 30
feet).
Bluetooth menu. Once paired, your device should link to the iBN180 whenever within range (about 30
feet).
Pairing with a Different Device
When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.
as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.
13
P14
14
P15
Playing Audio Via Bluetooth
1. Press the Button to turn the unit ON.
2. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display.
3. Adjust the volume output on your device to at least 50%. Press the Play Pause Button on the
2. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display.
3. Adjust the volume output on your device to at least 50%. Press the Play Pause Button on the
unit to play audio from your linked Bluetooth device. In a few moments the Bluetooth wave
icons will appear, indicating Bluetooth streaming mode.
icons will appear, indicating Bluetooth streaming mode.
4. Press the – or + Buttons to go to the previous or next track.
5. Press the or Buttons to adjust the volume on the unit.
6. When done listening, press the Button to turn the unit off. Remember to turn off your audio device, too.
5. Press the or Buttons to adjust the volume on the unit.
6. When done listening, press the Button to turn the unit off. Remember to turn off your audio device, too.
Playing Audio via Aux-In
1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on the
back of the unit and the other end into the headphone or output jack of your audio device
.
2. Press the Button on the unit to turn it on.
3. Press and release the Mode Button as needed until the AUX indicator icon appears on the display.
4. Power on your device and place in play mode. Adjust the volume output on the device to at least 50%.
5. Press the or Buttons to adjust the volume on the unit.
6. When done listening, press the Button to turn the unit off. Remember to turn off your audio device,
3. Press and release the Mode Button as needed until the AUX indicator icon appears on the display.
4. Power on your device and place in play mode. Adjust the volume output on the device to at least 50%.
5. Press the or Buttons to adjust the volume on the unit.
6. When done listening, press the Button to turn the unit off. Remember to turn off your audio device,
too.