SATO GY412 Manuel D’Utilisation

Safety Precautions

Page ii

• Do not place the printer in areas 

with high humidity or where con-
densation forms. If condensa-
tion forms, immediately turn off 
the power switch and do not use 
the printer until it dries. Using 
the printer while condensation is 
on it could result in electric 
shock.

• When moving the printer, 

always unplug the power cord 
from the outlet and check to 
make sure all external wires are 
disconnected before moving it. 
Moving the printer with the wires 
still connected could damage 
the cords or connecting wires 
and result in a fire or electrical 
shock.

• Do not carry the printer with 

paper loaded in it. The paper 
could fall out and cause an 
injury.

• When setting the printer on the 

floor or a stand, make sure not 
to get your fingers or hands 
pinched under the printer feet.

• Do not operate the power 

switch or plug in/unplug the 
power cord with wet hands. 
Doing so could result in electric 
shock.

• Keep the power cord away from 

hot devices. Getting the power 
cord close to hot devices could 
cause the cord’s covering to 
melt and cause a fire or electri-
cal shock.

• When unplugging the power 

cord from the outlet, be sure to 
hold it by the plug. Pulling it by 
the cord could expose or break 
the cord wires and cause a fire 
or electric shock.

• The power cord set that comes 

with the printer is especially 
made for this printer. Do not use 
it with any other electrical 
devices.

• Be careful not to get your fin-

gers pinched when opening or 
closing the top cover. Also be 
careful the top cover does not 
slip off and drop.

• The print head is hot after print-

ing. Be careful not to get burned 
when replacing paper or clean-
ing immediately after printing.

• Touching the edge of the print 

head immediately after printing 
could result in injury. Use cau-
tion when replacing the label or 
when cleaning the print head.  
You should not replace the print 
head without having received 
the proper training.

• When loading roll paper, be 

careful not to get your fingers 
pinched between the paper roll 
and the supply unit.

• When not using the printer for a 

long time, unplug the power 
cord from the outlet to maintain 
safety.

• When maintaining and cleaning 

the printer, unplug the power 
cord from the outlet to maintain 
safety.