SATO CX200 Manuel D’Utilisation

FEED Button

Advances print media

PRESS - to advance media
PRESS while pressing READY
indicator - to print test label
PRESS - to pause printing during
batch mode operation

READY Indicator

ON-OFF Button

Shows printer status

Places printer in On-Line
or Off-Line mode

GREEN - Printer ready for data
OFF - Printer busy, or Off-Line
RED - Printer needs attention
PRESS to switch to/from
Off-Line or to reset the printer

Power Input

Connects to power supply

Connect to transformer provided
with printer

Serial Port

Data input

DB9 female connector for
connection to host controller,
RS232 interface

Parallel Port

Data input

Centronics compatible connector
for connection to host controller

Print Head
Release

Unlocks print head

Push both releases toward rear
of printer to release print head

Top Cover

Protects print media and
mechanism

Lift to open
Push outward at hinge to remove

1.

Plug the output of the AC power supply
provided with the printer into the connec-
tor on the bottom panel.

2.

Connect the supply into an AC outlet
having the proper voltage.

Note:
CX200 printers consume very little power when
idle, so are not equipped with a power switch.
Pressing the READY indicator/ON-OFF (a com-
bined control) will reset the printer and switch it
from Off-Line to On-Line mode.

Important!
The required AC voltage is marked on the power supply.
Confirm that your AC voltage matches the power supply
requirements. Do not use any power supply other than
the one provided with the printer.

CX200 User's Guide

Page 2

PN 9001050 Rev.

B