Actiontec electronic V.90 Manuel D’Utilisation

Step 1 Reboot the computer and log in to Windows NT 4.00.

Step 2 Go to: Start-Settings-Control Panel and double-click on the Modems

icon. At the Modems Properties dialog box, click Add.

Step 3 An Install New Modem window should appear. Allow Windows NT to

detect your modem. Click on the Next> button.

Step 4 If a modem is found, Windows NT will query it. In most cases Windows

NT will detect the modem as a Standard Modem. Click on the Change

button.

Step 5 Insert the diskette (or CD-ROM) containing the modems .inf files and

click the Have Disk button. When prompted for the path, type A:\ (or the

CD-ROM Drive letter) and then click the OK button.

Step 6 When prompted to select the manufacturer and model of the modem,

click the OK button. At the next screen click the Next> button.

Step 7 Click on the Modems icon in the Control Panel. Verify that Windows

NT has correctly found the modem.

Step 8 If you wish to use your modem to dial into a Windows NT Remote Ac-

cess Server or wish to connect to the Internet, you will need to configure

Dial-up Networking. Go to: Start-Settings-Control Panel and double-

click the Network icon. Click on the Services folder and select Remote

Access Service. If the Remote Access Service option is not listed (if

present, go to Step 9), click on the Add button. Scroll-down the menu

and select Remote Access Service. Click on the OK button. Windows

NT may ask for its own disks or CD-ROM for some files. Insert as re-

quired. After you have installed Remote Access Service add the appro-

priate protocols as directed (i.e.. TCP/IP for Internet Access).

Step 9 At the Remote Access Setup dialog box, click on Add. Select the

RAS Device you wish to add and Click OK.

Step 10 Click Continue to finish the Installation.

Step 11 After Windows NT has completed the binding process, allow Windows

NT to shut down and restart the computer.