Baldor 15H Manuel D’Utilisation

3-2 Receiving & Installation

MN715

The control must be securely fastened to the mounting surface at the mounting holes.

If the control will be subjected to levels of shock greater than 1G or vibration greater than
0.5G at 10 to 60Hz, the control should be shock mounted.

Control sizes B2, C2 and D2 are designed for panel or through the wall installation.  Refer
to Section 6 of this manual for drawings and dimensions of the through the wall mounting
kits.

1.

Refer to the Remote Keypad Installation procedure and mount the keypad.

2.

Connect the keypad cable to the keypad connector of the main control board.