Panasonic KX-FLM661 Manuel D’Utilisation
12. Help
68
For assistance, please visit http://www.panasonic.com/help
12.3.4 Copier
12.3.5 Fax
The name of the desired
computer will not be
displayed on the unit when
scanning documents from
the unit (KX-FLM671, LAN
connection only).
computer will not be
displayed on the unit when
scanning documents from
the unit (KX-FLM671, LAN
connection only).
L
The printer driver has not been installed. Install it on your computer (page
23).
23).
L
The PC name list up feature has been set to [Off]. Set [PC name list up
on device] to [On] (page 26).
on device] to [On] (page 26).
L
The maximum number of computers on the LAN is connected to the unit (up
to 30 computers). Set [PC name list up on device] to [Off] on the other
computers (page 26).
to 30 computers). Set [PC name list up on device] to [Off] on the other
computers (page 26).
L
The IP address of the unit may have changed. To detect the IP address,
proceed as follows.
[
proceed as follows.
[
Start] i [All Programs] or [Programs] i [Panasonic] i the
unit’s name i [IP Address Checker]
L
The IP address for the unit will be detected.
Problem
Cause & Solution
The unit will not make a copy.
L
You cannot make a copy during programming. Make the copy after
programming.
programming.
L
The document was not fed into the unit properly. Re-insert the document.
L
Recording paper is not installed or the unit has run out of paper. Install
paper (page 15).
paper (page 15).
Letters on the copied
documents are not clear.
documents are not clear.
L
The original document is too dark or too light. Change the contrast (page
33) and try again.
33) and try again.
The copied documents are
too dark and cannot be read.
too dark and cannot be read.
L
You used a colored paper as a document. Change the contrast (page 33)
and make a lighter copy of the document, using “
and make a lighter copy of the document, using “
TEXT” resolution (page
33).
Problem
Cause & Solution
I cannot send documents.
L
The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 17).
to the [LINE] jack (page 17).
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
again.
L
The other party’s machine is not a fax machine. Check with the other party.
L
The other party’s fax machine failed to answer the fax automatically. Send
the fax manually (page 38).
the fax manually (page 38).
I cannot send a fax overseas.
L
Use the overseas transmission mode (feature #411 on page 53).
L
Add two pauses at the end of the telephone number or dial manually.
The other party complains
that letters on their received
document are distorted.
that letters on their received
document are distorted.
L
If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
L
Another telephone on the same line is off the hook. Hang up the extension
telephone and try again.
telephone and try again.
The other party complains
about the quality of their
received documents.
about the quality of their
received documents.
L
Try copying the document. If the copied image is clear, there may be
something wrong with the other party’s machine.
If the copied image is not clear, too dark, black and white lines or smudges
appear, refer to “12.3.2 Printing problems”, page 67.
something wrong with the other party’s machine.
If the copied image is not clear, too dark, black and white lines or smudges
appear, refer to “12.3.2 Printing problems”, page 67.
L
The original document is too dark or too light. Change the contrast (page
38) and try again.
38) and try again.
Problem
Cause & Solution