Wacom DTK-2400 Manuel D’Utilisation

11

11

STEP 1: HARDWARE INSTALLATION

In this step, install the video, USB, and power cables.

Important: Never connect or disconnect the video or power cables while your computer or pen 
display are powered on.  This can damage the display or video card.

1. Turn off your computer.

2. Determine if your computer has a digital (DVI or DisplayPort) or analog (VGA) port.  If your computer has 

only one video port, unplug your previous monitor or add a second video card.  For best results, 
connect Cintiq to a DVI-D or DisplayPort card.

3. Follow the below instructions for your video port.  Make sure to tighten any connector thumbscrews.  

See  – A –  in the 

.

4. Using the USB cable located at the base of the Cintiq display stand, connect to an available USB port 

on your computer or USB hub attached to your computer.  See  – B –  in the 

.

5. Connect the power adapter to the display stand extension cable for power.  See  – C –  in the 

6. Connect the adapter power cable and plug into an AC outlet.  See  – D –  in the 

.

7. Turn on the pen display.  The power LED will light orange.

For DVI operation, use the DVI-D video cable connector located at the base of the Cintiq 
display stand.  Connect the cable to the DVI port located on your computer video card.

Cintiq can be connected to either a DVI-D or a DVI-I card.

For DisplayPort operation, use the DisplayPort cable.  The cable is located within the base 
of the display stand.  Access the DisplayPort cable by removing the rear cover from the 
display stand.  See 

 for details.

Connect the DisplayPort cable to your computer video card.

For VGA operation, you will need to completely remove the DVI-I to DVI-D cable and 
replace it with the provided DVI-I to VGA cable.  See 

 for details.

If connecting to a Mac Mini DisplayPort, you will need to obtain an appropriate adapter.  
Using an Apple Mini DisplayPort to Dual-Link DVI Adapter is recommended.  Check with 
your local product retailer or an online outlet for availability.

Connect the adapter between the Cintiq DVI-D cable connector and your Mac.

DVI-I

DVI-D

DisplayPort

VGA