Panasonic KX-FC195AL Manuel D’Utilisation

Page de 86
1. Introduction and Installation
15
3
Open the back cover (
1).
4
Insert the blue core of the front ink film roll 
(
1) into the right slot of the unit (2). Insert 
the gear with the blue core (
3) into the left 
slot of the unit (
4). Insert the rear ink film roll 
(
5).
L
The ink film is safe to touch, and will not 
rub off on your hands like carbon paper.
5
Turn the gear with the blue core (
1) in the 
direction of the arrow.
L
Make sure that the ink film is wrapped 
around the blue core (
2) at least once.
6
First close the back cover securely (
1) by 
pushing down on the dotted area at both 
ends (
2). Then close the front cover 
securely (
3).
1.8.2 Replacing the ink film
The included film roll is a starter ink film. To 
ensure that the unit operates properly, we 
recommend the use of Panasonic replacement 
film. See page 11 for accessory information.
L
We cannot be responsible for any damage to 
the unit or degradation of print quality which 
1
2
3
4
5
1
1
Slack/Crease
Reverse
Correct
Incorrect
Tight
1 turn
The ink film is not wrapped 
around the blue core.
2
2
1
3
FC195AL.book  Page 15  Tuesday, November 18, 2003  10:28 AM