Mocomtech CDM-570L Manuel D’Utilisation
CDM-570/570L Satellite Modem with Optional IP Module
Revision 4
IP Module - CLI and Telnet Operation
MN/CDM570L.IOM
17.2.2.2 Satellite/HDLC Interface Page
The Satellite/HDLC Interface) page is activated from the Interface Configuration page.
The Satellite/HDLC Interface page contains the following options/fields:
Menu Options/Fields
Entry
Description
HDLC Addr Mode
Read
Only
The HDLC Address mode is configured via the
Working mode which is found on the Administration
page.
Working mode which is found on the Administration
page.
Point-To-Point Mode – In this mode of operation, no
HDLC address is transmitted over the satellite link.
The restrictions on using this mode are that it can only
be used for pure Point-to-Point configurations.
HDLC address is transmitted over the satellite link.
The restrictions on using this mode are that it can only
be used for pure Point-to-Point configurations.
Small Network Mode (up to 254 addresses) - In this
mode of operation a single byte HDLC address will be
transmitted over the satellite link (0x1 – 0xFE).
mode of operation a single byte HDLC address will be
transmitted over the satellite link (0x1 – 0xFE).
Large Network Mode (up to 32766 addresses) - In this
mode of operation a two byte HDLC address will be
transmitted over the satellite link (0x1 – 0xFFFE).
mode of operation a two byte HDLC address will be
transmitted over the satellite link (0x1 – 0xFFFE).
Receive HDLC Channel
Addresses
Addresses
H
Activates Receiver HDLC Addresses page.
Save Parameters
S
This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit
X
This option allows a user to exit the current menu and
return to its parent menu.
return to its parent menu.
17–23