Mocomtech CDM-570L Manuel D’Utilisation

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

IP Module - CLI and Telnet Operation 

MN/CDM570L.IOM 

Add IP to MAC ARP entry 

Adds an IP to MAC ARP entry.  

Allows the user to delete a Static ARP entry. Queries 
the user for the IP address of the ARP entry to delete. 

Delete ARP Entry 

Displays the entire IP to MAC ARP table. Includes the 
Static as well as dynamic ARP entries. Displays blocks 
of 10 ARP entries.  Hit ‘Enter’ key to display next 10 
entries or ‘Escape’ to return to ARP Table Utilities 
page. 

Display ARP Tbl 

This option allows the entire ARP table to be removed. 
This is equivalent to performing the standard UNIX 
command “arp –d” on each address reported in an “arp 
–a” command. The command only flushes the dynamic 
ARP entries. The static ARP entries will not be 
removed. 

Flush ARP Table 

The ARP Table menu allows the user to view up to 8 
different ARP definitions per screen. To allow editing 
on any of the 256 entries that can be defined, the user 
can select a base address to control which 8 ARP 
entries are displayed. For example, if the user wants to 
edit static ARP Entries 32-40, then a Base value of 32 
should be defined. 

Base 

This option allows a user to save the current 
configuration to permanent storage. This configuration 
will be restored on each successive power cycle. 

Save Parameters 

This option allows a user to exit the current menu and 
return to its parent menu. 

Exit 

 

17–42