Mocomtech CDM-570L Manuel D’Utilisation

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

Appendix F 

MN/CDM570L.IOM 

 

The keypad has an auto-repeat feature. If a key is held down for more than 1 second, the 
key action will repeat, automatically, at the rate of 15 keystrokes per second. This is 
particularly useful when editing numeric fields, with many digits, such as frequency or data 
rate. 

The Outdoor Unit (ODU) connected to a CDM-570 Modem through FSK can be remotely 
monitored and controlled by using ODU remote commands through Serial Remote or Telnet. 
The address of the ODU is setup as follows: 

 

•  For local-end ODUs,  

-  use Modem’s RC address + 1 for Stand-alone unit or Online unit in a 1:1 redundancy 

system; 

-  use Modem’s RC address + 2 for Offline unit in a 1:1 redundancy system. 
 

•  For distant-end ODUs in an EDMAC setup,  

-  use Slave Modem’s RC address + 3 for Stand-alone unit or Online unit in a 1:1 

redundancy system; 

-  use Slave Modem’s RC address + 4 for Offline unit in a 1:1 redundancy system. 

The user is presented with the following choices: 

 

(Configuration) This menu branch permits the user to fully configure 
the unit. 

This menu branch permits the user to monitor the alarm status of the 
unit, to view the log of stored events, and to display the Receive 
Parameters screen. 

This menu branch permits the user to invoke one of several test 
modes (loopbacks, for example). 

(Information) This menu branch permits the user to view information 
on the unit, without having to go into configuration screens. 

(Save/Load) This menu branch permits the user to save and to 
retrieve up to 10 different modem configurations. 

 Monitor Save/Ld Util ODU 

F–2