3com CMX Manuel D’Utilisation
3Com U.S. Robotics
Cable Modem
CMX
Quick Installation Guide
What You Need to Install Your Cable Modem CMX
IIn
nccllu
ud
de
ed
d::
•
Cable modem
•
Cable modem power supply
•
RJ-45 network cable
•
Rubber feet and stacking clips kit
•
Cable Connections
CD-ROM
•
This Quick Installation Guide
•
User’s Guide & Reference
PN 1.024.1970-00
Copyright
3Com Corporation. All rights reserved. 3Com and U.S. Robotics
are registered trademarks and Connections is a trademark of 3Com
Corporation. Windows is a registered trademark of Microsoft Corp.
Macintosh is a registered trademark of Apple Computer, Inc. Any other
trademarks, trade names, or service marks used in this manual are the
property of their respective owners.
Corporation. Windows is a registered trademark of Microsoft Corp.
Macintosh is a registered trademark of Apple Computer, Inc. Any other
trademarks, trade names, or service marks used in this manual are the
property of their respective owners.
N
No
ot
t IIn
nccllu
ud
de
ed
d::
•
A PC running Windows
95 (or later) or a Macintosh
running System 7.5 (or later) with TCP/IP protocol
installed (see the “Before You Begin” section in the
included User’s Guide & Reference for more information
about installing TCP/IP)
installed (see the “Before You Begin” section in the
included User’s Guide & Reference for more information
about installing TCP/IP)
•
An active two-way cable line
•
An active Ethernet port or network interface card (NIC)
installed in your computer
installed in your computer
•
A 7/16 inch (or adjustable) wrench for securing the cable
line to the modem
line to the modem
•
A screwdriver, pushpins, and screws (for optional wall-
mounting). The screw heads should be at least 0.2” (5mm)
in diameter for them to be properly captured in the slot. If
you are using wood screws, use #6 pan heads or
equivalent.
mounting). The screw heads should be at least 0.2” (5mm)
in diameter for them to be properly captured in the slot. If
you are using wood screws, use #6 pan heads or
equivalent.