MicroNet Technology R8 Manuel D’Utilisation

MaxNAS Owner’s Manual

25

3.2 LAN2 Configuration
The LAN Configuration screen for the LAN2 (“LAN”) Interface allows for the following controls:

The following table lists the menu items on the LAN2 (“LAN”) Configuration page:

MAC Address

This field displays the MAC address of the LAN port

Jumbo Frame Support Like WAN, this port also supports Jumbo Frames. (For more information about Jumbo 

Frames see section 4.1.1)

IP Address

LAN2 port requires static addressing, and 

does not support DHCP.

Netmask

This is where you assign a new subnet mask

Gateway

This is where you assign a new gateway

Link Detected

This indicates whether or not the link to your network is currently live

Link Speed

This field displays the current speed of your LAN 1 network link.

DHCP Configuration

The MaxNAS R8 can act as your DHCP server.  To enable this feature simply click 

enable and assign a range for the DHCP server to work within. 

The MaxNAS R8 offers the following network services:
• SMB/CIFS (Server Message Block) or “Windows” Networking
• Web Access Control
• UPNP (Universal Plug and Play) automatic detection and configuration
• Apple File Protocol Service 

 

• NFS Service   

 

 

• (S)FTP Service

• Synchronization Services 

• DLNA Streaming

Note: The MaxNAS R8 web interface
will not allow you to assign an IP
within the same subnet to both ports