Netgear FVS318N Manuel D’Utilisation

In the Defined Addresses Status section of the screen, select one of the following radio 
buttons:

Deny Login from Defined Addresses. Deny logging in from the IP addresses in the 
Defined Addresses table.

Allow Login only from Defined Addresses. Allow logging in from the IP addresses 
in the Defined Addresses table.

Click Apply to save your settings.

In the Add Defined Addresses section of the screen, add an address to the Defined 
Addresses table by entering the settings as explained in the following table:

Click the Add table button. The address is added to the Defined Addresses table.

Repeat 

 and 

 for any other addresses that you want to add to the Defined 

Addresses table.



In the Defined Addresses table, select the check box to the left of each address that you 
want to delete, or click the Select All table button to select all addresses.

Click the Delete table button.



Select Users > Users. The Users screen displays (see 

In the Action column of the List of Users table, click the Policies table button for the user for 
which you want to set login policies. The policies submenu tabs display, with the Login 
Policies screen in view.

Click the By Source IP Address submenu tab.

In the upper right of the screen, select the IPv6 radio button. The By Source IP Address 
screen displays the IPv6 settings. (The following figure shows an IP address in the Defined 
Addresses table as an example.)

Source Address Type

Select the type of address from the drop-down list:

•  IP Address. A single IPv4 address.

• IP Network. A subnet of IPv4 addresses. You need to enter a netmask length in 

the Mask Length field.

Network Address / IP 
Address

Depending on your selection from the Source Address Type drop-down list, enter 
the IP address or the network address.

Mask Length

For a network address, enter the netmask length (0–32).

By default, a single IPv4 address is assigned a netmask length of 32.