MRV Communications TS5000/4U1/V*) Manuel D’Utilisation
M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
ii
Other Standards
1. CISPR 22: 1993
AS/NZS 3548: 1995, Class A,
Joint Amendment No. 1: 1997, Joint Amendment No. 2: 1997
2. EN 60950+A1+A2+A3+A4+A11
Joint Amendment No. 1: 1997, Joint Amendment No. 2: 1997
2. EN 60950+A1+A2+A3+A4+A11
ACA TS001-1997
AS/NZS 3260: 1993 A4: 1997
ITU G.703, G.704, G.706,G.736, G.737, G.738, G739, G740, G.775, G.823.
AS/NZS 3260: 1993 A4: 1997
ITU G.703, G.704, G.706,G.736, G.737, G.738, G739, G740, G.775, G.823.
MRV
™ Laser Safety Certification
The TereScope is designed, built, and tested to be eyesafe, even if the output beams are viewed directly,
provided that no magnifying optics are used.
This product is Class 1M according to the American National Standard for Safe Use of Lasers ANSI
provided that no magnifying optics are used.
This product is Class 1M according to the American National Standard for Safe Use of Lasers ANSI
Z136.1-1993 provided that there is not a reasonable probability of accidental viewing with optics in the
direct path of the beam where the TereScope is installed.
This product is Class 1M according to the International Standard of the International Electro technical
Commission IEC 60825-1, Amendment 2, January 2001 entitled “Safety of laser products.” The
direct path of the beam where the TereScope is installed.
This product is Class 1M according to the International Standard of the International Electro technical
Commission IEC 60825-1, Amendment 2, January 2001 entitled “Safety of laser products.” The
following explanatory label is applicable to these products:
LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
(BINOCULARS OR TELESCOPES)
CLASS 1M LASER PRODUCT
This product complies with United States FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50 as published in June 2001, which allows for the use of the
IEC 60825-1 classification standard. Under this standard, these products are Class 1M.
A ‘Declaration of Conformity’, in accordance with the above standards, has been made and is on file at
MRV.
MRV.
Disclaimer
MRV
reserves the right to modify the equipment at any time and in any way it sees fit in order to improve it.
MRV provides this document without any warranty of any kind either expressed or implied, including, but not
limited to, the implied warranties of merchantability or fitness for a particular purpose.
Although much care has been taken in the preparation of this document, omissions and errors may still exist.
Therefore, the customer is advised to exercise due discretion in the use of the contents of this document since
the customer bears sole responsibility.
Therefore, the customer is advised to exercise due discretion in the use of the contents of this document since
the customer bears sole responsibility.
Trademarks
All trademarks are the property of their respective holders.
Copyright © 2007 by MRV
All rights reserved. No part of this document may be reproduced without the prior permission of MRV.
This document and the information contained herein are proprietary to MRV and are furnished to the
recipient solely for use in operating, maintaining and repairing MRV
equipment. The information within
may not be utilized for any purpose except as stated herein, and may not be disclosed to third parties
without written permission from MRV. MRV
without written permission from MRV. MRV
reserves the right to make changes to any technical
specifications in order to improve reliability, function or design.