JVC HR-J695U Manuel D’Utilisation

C

Press OK or 

e

 to move the highlight bar to “D.S.T.”, then press 

rt

 repeatedly until the desired setting is selected.

: Select if you want to adjust your VCR’s clock 

automatically by the incoming signal from the host 
channel. (Auto Daylight Saving Time enables automatic 
adjustment of the VCR’s clock at the start and end of 
Daylight Saving Time.) Be sure to select the correct time 
zone manually in step 

4.

ON

:

Adjustment will be made by the built-in clock itself.

OFF

:

Select when Daylight Saving Time does not apply to you.

D

Press OK or 

e

 to move the highlight bar to “TIME ZONE”, then press 

rt

 repeatedly until “AUTO” or the desired time zone is selected. 

Each time you press the button, the time zone changes as follows:

{

 AUTO 

{

 ATLANTIC 

{

 EASTERN

 {

 CENTRAL

{

 MOUNTAIN 

{

 PACIFIC

 {

 ALASKA 

{

 HAWAII

{

 (back to the beginning)

E

Press MENU to return to normal screen. Turn off the VCR. “Aut” 
will appear on the display panel while the clock is being set. The 
current clock time will appear automatically when the clock 
setting is complete.

First follow steps 

1 to 2 in “Preparations” above, then go to the 

following steps.

A

Press 

rt

 until the desired time appears, 

then press OK or 

e

. Set the date and year 

in the same way.

● Holding 

rt

 changes the time in 30-

minute intervals, or changes the date in 
15-day intervals.

B

Press OK or 

e

 to move the highlight bar to 

“D.S.T.”, then press 

rt

 to select the 

desired setting.
ON

: Adjustment will be made by the 

built-in clock itself.

OFF

: Select when Daylight Saving Time 

does not apply to you.

C

Press MENU and normal screen appears.

To make corrections any time during the process
Press OK or 

e

 repeatedly until the item you want to change 

blinks, then press 

rt

.

Perform Auto Channel Set only if channels have not been set 
correctly by the Plug&Play setting.

A

Press MENU on the Remote. Press 

rt

 to 

move the highlight bar (arrow) to “TUNER 
SET”, then press OK or 

e

.

B

Press 

rt

 to move the highlight bar 

(arrow) to “AUTO CHANNEL SET”, then 
press OK or 

e

. The VCR selects the correct 

band (TV or CATV) automatically during 
Auto Channel Set.

● When Auto Channel Set is complete, 

“SCAN COMPLETED” appears on 
screen.

● If the scan was unsuccessful, “SCAN 

COMPLETED–NO SIGNAL–” appears 
on screen. Check the connections and 
start again.

Press MENU to return to normal screen.

You can add the channels you want or delete the channels you do 
not want manually.

A

Press MENU on the Remote. Press 

rt

 to 

move the highlight bar (arrow) to “TUNER 
SET”, then press OK or 

e

.

B

Press 

rt

 to move the highlight bar 

(arrow) to “MANUAL CHANNEL SET”, 
then press OK or 

e

.

C

To add channels
A Press the Number keys on the Remote 

to input a channel number you want to 
add.

B Press OK or 

e

 to set to “ADD”.

C Repeat A to B to add other channels. 

Press MENU to return to normal screen.

To skip channels
A Press 

rt

 or the Number keys to select a channel number you 

want to skip.

B Press OK or 

e

 to set to “SKIP”.

C Repeat A and B to skip other channels. Press MENU to return 

to normal screen. 

Selections of host channel, D.S.T. mode and time zone will be 
reset to “AUTO” after a power failure occurs.

The clock set manually will be lost after a power failure occurs.

● Band selection will be reset to “CATV”.

● The setting of the ADD/SKIP channel will be reset.