ONKYO ABX-N300 Manuel D’Utilisation

En-

9

Compatible iPod/iPhone models
Made for:

• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod classic
• iPod nano (2nd, 3rd, 4th, 5th and 6th generation)
• iPhone 4, iPhone 3GS, iPhone 3G, iPhone

Note:
Before you begin using it, please update your iPod/
iPhone to the latest version. For details, refer to the 
Apple website.

■ About the Dock Adapter
The ABX-N300’s dock uses the Universal Dock system. 
By attaching an interchangeable part called a dock 
adapter, you’ll be able to insert your model of supported 
iPod/iPhone.
• Use a commercially available dock adapter or the one 

that was included with your iPod/iPhone.

• If your iPod is a compact and lightweight model, and 

has no compatible adapter, you may connect it directly.

■ Removing the Dock Adapter
As shown in the illustration below, insert a slotted 
screwdriver or similar object into the slit of the dock 
adapter, and lift the adapter up.

• If you connect an iPod/iPhone to the ABX-N300 

without attaching a dock adapter, you risk straining 
and damaging the connector. Even if the dock adapter 
is connected, you should avoid straining the connector 
by moving or wiggling the connected iPod/iPhone.

• When inserting or removing your iPod/iPhone, take 

care to insert or remove it in a straight line with the 
angle of the connector, and do not use excessive force.

• Do not forcefully press the controls of your iPod/

iPhone while it is connected to the ABX-N300, or 
wiggle your iPod/iPhone forward or backward. Doing 
so will cause damage or faulty contacts in the 
connector.

• Do not use the system in conjunction with other 

accessories such as an FM transmitter or microphone. 
Doing so may cause faulty operation.

• If your iPod/iPhone is in a case, it might not be able to 

fully connect with the connector, causing failure to 
sound or inability to operate the remote control. 
Remove your iPod/iPhone from its case before 
inserting it in the ABX-N300.

Move the slide cover to the 
left to expose the dock.

Dock adapter

First align the front 
edge of the dock 
adapter, and then 
press down on the 
rear edge.