Motorola ml900 Manuel D’Utilisation
Battery Low Signals and Actions
Battery Low occurs when the battery has approximately 10% (Windows
default setting) of its charge remaining. The computer gives warning
beeps or messages and the Battery Charge Indicator (
default setting) of its charge remaining. The computer gives warning
beeps or messages and the Battery Charge Indicator (
) blinks red to
alert you to take actions.
NOTE: You can set up your threshold and signals of Battery Low under Windows.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the computer. If you are using the
audio subsystem, hard or floppy disk drives, the battery might run out of
charge very quickly.
time depends on how you are using the computer. If you are using the
audio subsystem, hard or floppy disk drives, the battery might run out of
charge very quickly.
Always respond to Battery Low by placing your computer on Standby or
Hibernation mode, turning off the computer, or connecting the AC or car
adapter.
Hibernation mode, turning off the computer, or connecting the AC or car
adapter.
If you do not take any action and after a couple of warning beeps, the
computer will automatically hibernate and turn off.
computer will automatically hibernate and turn off.
CAUTION: If you fail to save your data when the battery completely runs out of charge,
then you lose your data.
3-6 Managing
Power