Benq PB6100 Brightness 1500 Lumens SVGA Resolution Weight 2.7kg(5.9lbs) DLP 99.J8677.BEE Manuel D’Utilisation

Troubleshooting

32

Status Messages    

On-Screen Messages

Description

SEARCHING

Projector is searching for input.

ACQUIRING SIGNAL

Projector has identified the input signal and is 
running the auto image adjustment function.

OUT OF RANGE

Input signal frequency exceeds the projector’s range.

Lamp Warning - Change 
Lamp If Brightness Is Low.

The lamp has been in operation for over 1980 hours. 
Install a new lamp for optimal performance. This 
message will display for 10 seconds after starting up 
the projector.

Out Of Lamp Usage Time - 
Change The Lamp! The 
Power Will Turn Off After 
3000 Hours.

The lamp has been in operation for over 2980 hours, 
and the power will turn off after 3000 hours. This 
message will display for 30 seconds after starting up 
the projector.

Out Of Lamp Usage Time -  
Change The Lamp! Press 
<MENU> to enable 
<RESET>

The lamp has been in operation for over 3000 hours. 
The warning message will display for 40 seconds and 
then shut down automatically. If you have installed a 
new lamp, press <MENU> during the OSD on to 
enter for resetting the lamp hour to zero.