Fujitsu 480 Manuel D’Utilisation

C122-E003-02EN

7-13

 

GSWB

7.3 Configuration Copy Menu

Table 7.14  Displayed or setting item in the [Configuration Copy] window

Table 7.15  Buttons in the [Configuration Copy] window

[Switch] 

→

 [Configuration Copy]

• Copying

1 Select the copy source GSWB and copy destination GSWB from [Select the 

direction of copy], and specify the ID of the configuration definition file to be 
copied in [Select the configuration file ID].
Since two GSWB configuration definitions (config0 and config1) can be 
saved, select which configuration definition file on the GSWB to copy.

2 Click the [Apply] button.

Note:

- Before the switching operation can be performed based on the copied 

configuration definition file, you need to change the configuration in 
the [Active Image Change] window so that the configuration file is 
used at the time of startup, and then restart the GSWB.

- After the configuration definition file is copied, the specified 

configuration definition file comment will be "configuration copy."

- [Copy Source] is not selected on the initial display.

Item

Description

Select the direction of copy 
Copy from GSWB#0 
to GSWB#1

Copies settings from GSWB#0 to GSWB#1.

Copy from GSWB#1 
to GSWB#0

Copies settings from GSWB#1 to GSWB#0.

Select the configuration file ID
config 0 

config0 copies config 0

config 1

config1 copies config 1

Button

Description

Help

Displays the Help window.

Apply

Sets the specified value.

Cancel

Closes the window without saving the change.