Emerson MVME55006E Manuel D’Utilisation
MVME55006E Single-Board Computer Installation and Use (6806800A37D)
Hardware Preparation and Installation
Overview of Startup Procedures
16
1.4
Overview of Startup Procedures
The following table lists the things you will need to do before you can use this board and tells
where to find the information you need to perform each step. Be sure to read this entire chapter,
including all Caution and Warning notes, before you begin.
where to find the information you need to perform each step. Be sure to read this entire chapter,
including all Caution and Warning notes, before you begin.
1.5
Unpacking Guidelines
Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items
are present. Save the packing material for storing and reshipping of equipment.
are present. Save the packing material for storing and reshipping of equipment.
If the shipping carton is damaged upon receipt, request that the carrier’s agent be present
during the unpacking and inspection of the equipment.
during the unpacking and inspection of the equipment.
Table 1-1 Startup Overview
What you need to do...
Refer to...
Unpack the hardware.
Configure the hardware by setting
jumpers on the board.
jumpers on the board.
Install the MVME5500 board in a chassis.
Connect any other equipment you will be
using
using
Verify the hardware is installed.
Product Damage
Avoid touching areas of integrated circuitry; static discharge can damage circuits.
Inserting or removing modules with power applied may result in damage to module
components.
Avoid touching areas of integrated circuitry; static discharge can damage circuits.
Inserting or removing modules with power applied may result in damage to module
components.