Emerson MVME55006E Manuel D’Utilisation
MVME55006E Single-Board Computer Installation and Use (6806800A37D)
Functional Description
CPU Bus Interface
40
Each of the device buses are de-coupled from each other, enabling concurrent operation of the
CPU bus, PCI buses and access to SDRAM. Refer to the GT-64260B System Controller for
PowerPC Processors Data Sheet, listed in
CPU bus, PCI buses and access to SDRAM. Refer to the GT-64260B System Controller for
PowerPC Processors Data Sheet, listed in
, for more
details.
2.6.1
CPU Bus Interface
The GT-64260B supports MPX or 60x bus mode operation. The MVME5500 board has
jumper/build option resistors to select either operating mode at power-up.
jumper/build option resistors to select either operating mode at power-up.
2.6.2
Memory Controller Interface
The GT-64260B can access up to four banks of SDRAM for a total of 1GB of SDRAM memory.
The memory bus is capable of operating up to 133 MHz.
The memory bus is capable of operating up to 133 MHz.
The MVME5500 board has two banks on board and a connector for an expansion mezzanine
board with two additional banks.
board with two additional banks.
2.6.3
Interrupt Controller
The MVME5500 uses the interrupt controller integrated into GT-64260B to manage the GT-
64260B internal interrupts, as well as the external interrupt requests. The external interrupt
sources include the following:
64260B internal interrupts, as well as the external interrupt requests. The external interrupt
sources include the following:
z
On-board PMC interrupts
z
LAN interrupts
z
VME interrupts
z
RTC interrupt
z
Watchdog timer interrupts
z
Abort switch interrupt
z
External UART interrupts
The interrupt controller provides up to seven interrupt output pins for various interrupt functions.
For additional details regarding the external interrupt assignments, refer to the MVME5500
Single-Board Computer Programmer’s Reference Guide.
For additional details regarding the external interrupt assignments, refer to the MVME5500
Single-Board Computer Programmer’s Reference Guide.
2.6.4
I2C Serial Interface and Devices
A two-wire serial interface for the MVME5500 board is provided by a master/slave capable I2C
serial controller integrated into the GT-64260B device. The I2C serial controller provides two
basic functions. The first function is to optionally provide GT-64260B register initialization
following a reset. The GT-64260B can be configured (by setting jumper J17) to automatically
read data out of a serial EEPROM following a reset and initialize any number of internal
registers. In the second function, the controller is used by the system software to read the
contents of the VPD EEPROM contained on the MVME5500 board, along with the SPD
EEPROM(s), to further initialize the memory controller and other interfaces.
serial controller integrated into the GT-64260B device. The I2C serial controller provides two
basic functions. The first function is to optionally provide GT-64260B register initialization
following a reset. The GT-64260B can be configured (by setting jumper J17) to automatically
read data out of a serial EEPROM following a reset and initialize any number of internal
registers. In the second function, the controller is used by the system software to read the
contents of the VPD EEPROM contained on the MVME5500 board, along with the SPD
EEPROM(s), to further initialize the memory controller and other interfaces.