Emerson MVME55006E Manuel D’Utilisation

Interaction with MOTLoad is performed via a command line interface through a serial port on 
the single board computer, which is connected to a terminal or terminal emulator (for example, 
Window’s Hypercomm). The default MOTLoad serial port settings are: 9600 baud, 8 bits, no 
parity.

The MOTLoad command line interface is similar to a UNIX command line shell interface. 
Commands are initiated by entering a valid MOTLoad command (a text string) at the MOTLoad 
command line prompt and pressing the carriage-return key to signify the end of input. MOTLoad 
then performs the specified action. An example of a MOTLoad command line prompt is shown 
below. The MOTLoad prompt changes according to what product it is used on (for example, 
MVME6100, MVME3100, MVME5500).

Example:

MVME5500>

If an invalid MOTLoad command is entered at the MOTLoad command line prompt, MOTLoad 
displays a message that the command was not found.

Example:

MVME5500> mytest

"mytest" not found

MVME5500>

If the user enters a partial MOTLoad command string that can be resolved to a unique valid 
MOTLoad command and presses the carriage-return key, the command is executed as if the 
entire command string had been entered. This feature is a user-input shortcut that minimizes 
the required amount of command line input. MOTLoad is an ever changing firmware package, 
so user-input shortcuts may change as command additions are made.

Example:

MVME5500>[ver]sion

Copyright: Motorola Inc.1999-2005, All Rights Reserved

MOTLoad RTOS Version 2.0, PAL Version 1.0 RM01

Mon Aug 29 15:24:13 MST 2005

MVME5500>

Example:

MVME5500> ver

waitProbe

Wait for I/O Probe to Complete