Elo TouchSystems D-Series Rev.C] Manuel D’Utilisation

 

 

 

16  

The head power status is indicated by a different LED, which is located at the lower 

edge of the head (#3 in figure on page 13). 

Off 

No input power to head — Off mode 

Red 

Input power present, power switch off — Off mode 

Amber 

Input power present — Sleep mode 

Green 

Input power present — On mode 

The touch power status is indicated by a separate LED located at the lower edge of 

the head and to the right of the Head Power Status LED (#4 in figure on page 13). 

This feature is available for AT and APR 7010.  

Off 

No input power — Off mode 

Red 

Input power present, power switch off — Off mode 

Amber 

Input power present — Sleep mode 

Green 

Input power present — On mode 

Hard disk drive activity is indicated by a flashing LED on the base, just under the 

computer power LED (#1 in the figure on page 13). Reading from and writing to the 

disk causes the LED to flash. 

Off No 

activity 

Flashes green 

Activity