IBM 4400 Manuel D’Utilisation
62
Chapter
3
Configuring the XQ Emulation with Control Codes
Configuring the XQ Emulation with Control Codes
The remainder of this chapter describes the P-Series XQ printer control
language codes that may be sent from a host computer attached to the
printer, in order to configure and invoke numerous printer functions.
language codes that may be sent from a host computer attached to the
printer, in order to configure and invoke numerous printer functions.
Format for Control Code Descriptions
The following information is listed for each code function (where applicable
and possible).
and possible).
Name
The title or function of the command.
ASCII Code The standard ASCII name for the control code.
Hex Code
The code's numeric equivalent in hexadecimal.
Dec Code
The code's numeric equivalent in decimal.
Purpose
The function(s) of the control code.
Discussion A description of exceptions or limitations to normal use.
Example
A sample is provided for some control codes when it is possible
to illustrate the effect of a control code, or if a specific syntax is
required to complete the program statement (i.e. Horizontal Tab
set, Vertical Tab set/clear).
to illustrate the effect of a control code, or if a specific syntax is
required to complete the program statement (i.e. Horizontal Tab
set, Vertical Tab set/clear).
IMPORTANT
If you specify any parameters for a control code other than the ones that
are defined in the control code description, unpredictable results may
occur.
are defined in the control code description, unpredictable results may
occur.