Epson 386/33 PLUS Manuel D’Utilisation

If you set a password using the SETUP program, you must

enter it before you can use the system. When you turn on the

computer, it runs a memory test. Then the screen displays the

Enter

prompt. If you do not enter the correct

password, you cannot use the computer. If you have any

trouble using your password, try the following:

If you type the password and press 

 but nothing

happens, type it again and press 

If you know the current password but you want to

change or delete it, see Chapter 2 in the 

for

instructions.

If you do not know the current password, follow the

steps below.

If you have forgotten your current password and cannot use

your computer, follow these steps:

1. Turn off the computer and follow the instructions under

“Changing the Jumper Settings” in Chapter 4 to disable the

password function by setting jumper J3 to position A.

Be sure to ground yourself on the back inside panel of

the computer before touching any of the interior

components. Always replace the cover on the computer

before you turn it on again.

2. Turn on the computer. You do not see the Enter Password

prompt.