Axis VT CEILING BRACKET BALL JOINT WCM3A 0217-041 Manuel D’Utilisation
Codes de produits
0217-041
Videotec Verso Outdoor Housing Axis Communications
Application Note
2.5 Power
Input
and Consumption
The housing internal heater (always included) and optional 0217-011 VT POWER
SUPPLY OHEPS19 run on mains power (110/230VAC).
The 0217-011 VT POWER SUPPLY OHEPS19 is suitable for powering power
the Axis 211 Network Camera and as well as the optional 0217-131 VT
BLOWER KIT WITH AIR FILTER OHPVCF1
Power consumption for the heater is 40 W maximum during cold conditions.
Note: If the housing is powered with 110/120 VAC it is not possible to install the
optional 0217-131 VT BLOWER KIT WITH AIR FILTER OHPVCF1
combination due to the increased power required by the blower.
SUPPLY OHEPS19 run on mains power (110/230VAC).
The 0217-011 VT POWER SUPPLY OHEPS19 is suitable for powering power
the Axis 211 Network Camera and as well as the optional 0217-131 VT
BLOWER KIT WITH AIR FILTER OHPVCF1
Power consumption for the heater is 40 W maximum during cold conditions.
Note: If the housing is powered with 110/120 VAC it is not possible to install the
optional 0217-131 VT BLOWER KIT WITH AIR FILTER OHPVCF1
combination due to the increased power required by the blower.
It is recommended that a licensed electrician is consulted to ensure that the
electrical installation meets local laws and regulations.
electrical installation meets local laws and regulations.
2.6 Power supply and other accessories
2.6.1
0217-011 VT POWER SUPPLY OHEPS19
This 12 V DC power supply is specifically designed to be easily mounted
internally in the Verso housing and is suitable for powering the AXIS 211
Network Camera.
Important: This power supply cannot be used to power the AXIS 2120 or
2420 Network Cameras.
internally in the Verso housing and is suitable for powering the AXIS 211
Network Camera.
Important: This power supply cannot be used to power the AXIS 2120 or
2420 Network Cameras.
2.6.2 0217-121
VT
WATERPROOF JUNCTIONBOX OHEGB
This waterproof junction box can be used to install and protect wireless
devices, routers, wiring harnesses and other auxiliary equipment that are
required by the application. The junction box is waterproof to IP55 and
comes equipped with four PG9 cable glands.
devices, routers, wiring harnesses and other auxiliary equipment that are
required by the application. The junction box is waterproof to IP55 and
comes equipped with four PG9 cable glands.
Rev:
1.01,
Last
updated:
2004-08-26
7