Samsung NP900X3D Manuel D’Utilisation

Page de 141
64
Chapter 3.  
Using the computer
Wired Network
6
  Configure the IP settings.
When using DHCP, select Obtain an IP address 
automatically. To use a static IP address, select Use the 
following IP address, and set the IP address manually.
When not using DHCP, ask your network administrator for the 
IP address.
7
  When you have completed the settings, click the OK button.
The network settings have been completed.
Using the WOL (Wake On LAN) function
<Wake On LAN> is a function that activates the system from Sleep 
mode when a signal (such as a ping or magic packet command) 
arrives over the network (wired LAN).
1
  Click Charms menu on the Desktop > Settings 
áᔪ
Ŗᮁ
᜽᯲
ᰆ⊹
ᖅᱶ
 > 
Control Panel > Network and Internet > Network and 
Sharing Center and click on Change adapter settings in 
the left menu pane.
2
  Right-click on the Wired Ethernet Connection and select 
Properties.
3
  Click Configure > Power Management tab. Select Allow 
this device to wake the computer, then click OK. Restart 
the system.
-   If the system wakes up from Sleep mode even though there 
is no received signal, use the system after disabling the 
<Wake On LAN> function.
-   
Connecting a wired LAN while using a wireless LAN may not 
activate the 
<Wake On LAN> function. Set the Wireless LAN 
to Disable to use the <Wake On LAN> function.
-   <Wake On LAN> feature may not work while using Hybrid 
power saving feature. Hybrid sleep mode can be disabled 
from Power Options under Control Panel.