Toshiba PA3686U-1SET Manuel D’Utilisation
36
Using the dynadock™ and Adjusting Settings
Re-connecting and docking your computer
(Sample Image) The Eject and Sleep command
3
Wait before disconnecting the dynadock™ from the computer.
(Sample Image) Undocking in progress
When the computer is undocked, the dynadock Utility icon no
longer appears in the System tray/Notification Area.
longer appears in the System tray/Notification Area.
4
After the computer is undocked, the computer enters Sleep
mode.
mode.
Re-connecting and docking your computer
To re-connect and dock your computer to the dynadock™ (upon
returning to your desk with your computer after a meeting, for
example), do the following:
returning to your desk with your computer after a meeting, for
example), do the following:
❖
If you are using a wireless USB adaptor, make sure the adaptor
is properly connected or re-connect the adaptor.
is properly connected or re-connect the adaptor.
❖
Make sure the computer is within wireless communication
range of the dynadock™.
range of the dynadock™.
❖
Remove any obstructions between the computer and the
dynadock™.
dynadock™.
❖
If the computer is in standby/sleep/hibernation mode, press the
computer's power button to resume.
computer's power button to resume.
❖
Press the Dock button on the top of the dynadock™ to dock.
The indicator light on the front of the dynadock™ flashes
green to indicate docking is in progress. The light turns solid
green when docking is completed.
green to indicate docking is in progress. The light turns solid
green when docking is completed.