Toshiba E6581830 Manuel D’Utilisation
E658130
- 40 -
6.3.
Program example for setting the operation commands
Example 3 shows
a ladder logic to
give a forward command to station 2 inverter.
6.4.
Program example for setting the running frequency
Example 4 shows
a ladder logic to
chang the running frequency of station 1 inverter to
50.00Hz
Set frequency: 5000 (decimal)
Set frequency: 5000 (decimal)
X0
X0F
X1
SW80.1
M0
X20
( M0)
(Y1020)
Check the ready of the Station 2
Forward rotation command (RY20)
Example 3
X100D
M302
X0
X0F X1
( M0)
SW80.0
M0
X20
[ PLS M300]
M300
[ SET M301]
M301
X100D
[ MOV K5000 W101]
[ SET Y100D]
[ RST Y100D]
[ RST M302]
[ END]
[ RST M301]
[ SET M302]
Check the ready of the station 1
Write set frequency to
Turn off the frequency setting
command RAM (RY0D)
command RAM (RY0D)
Turn off instruction frequency writing
(RY0D), when instruction frequency
writing completion flag (RX0D) is
turned on.
(RY0D), when instruction frequency
writing completion flag (RX0D) is
turned on.
Example