Alienware M17X R4 Manuel D’Utilisation
Removing the Palm Rest Assembly |
65
7
Remove the power button board. See "Removing the Power Button Board" on
page 55.
page 55.
8
Remove the display assembly. See "Removing the Display Assembly" on page 57.
9
Remove the status light board. See "Removing the Status Light Board" on page 61.
Procedure
1
Disconnect the touch pad cable, LVDS cable, and Media Card Reader cable from the
connectors on the system board.
connectors on the system board.
2
Remove the screws that secure the palm rest assembly to the computer base.
3
Carefully pry out the palm rest assembly along the rear edge and then ease the palm
rest assembly from the computer base.
rest assembly from the computer base.
CAUTION:
Carefully separate the palm rest assembly from the
computer base to avoid damage to the palm rest assembly.
4
Lift the palm rest assembly off the computer base.
1
palm rest assembly
2
LVDS cable
3
touch pad cable
4
Media Card Reader cable
5
screws (3)
2
3
4
5
1