ATTO Technology SC 5700 Manuel D’Utilisation
25
ATTO Technology Inc. FastStream SC Installation and Operation Manual
6.2 Drive Diagnostics
You may determine the performance of drives attached to the FastStream using various displays and tests in
ExpressNAV Storage Manager.
ExpressNAV Storage Manager.
The following instructions assume you have already
set up at least one RAID group.
The ATTO FastStream collects various metrics to
measure performance for physical drives attached to
the FastStream during normal system operation and
drive initialization and verification.
New performance data is updated every 60 seconds
which impacts performance slightly, even if you
minimize the browser window. Exit the ExpressNAV
Storage Manager completely whenever you need
maximum performance.
set up at least one RAID group.
The ATTO FastStream collects various metrics to
measure performance for physical drives attached to
the FastStream during normal system operation and
drive initialization and verification.
New performance data is updated every 60 seconds
which impacts performance slightly, even if you
minimize the browser window. Exit the ExpressNAV
Storage Manager completely whenever you need
maximum performance.
Preliminary steps
1
If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser. On the splash
screen, click
Storage Manager, type the IP address of your
appliance in a standard browser. On the splash
screen, click
Enter Here. In the box provided,
type in your user name and password, and click
OK.
OK.
2
The
Health and Status Monitor page appears.
Click the
Diagnostics button on the left hand
menu.
3
Select the operation you wish to perform from
the next menu presented.
the next menu presented.
Note
Identify SES Elements is not available for
the FastStream SC 5300 model.
the FastStream SC 5300 model.
Read only drive test
The read only test performs a non-destructive scan
over the entire surface of each drive to identify bad
areas of the disk drives and determine read
performance. It may be run while data is passing
through the FastStream.
Running this test may negatively impact performance.
Once the Read-only test has completed, system
operation returns to normal.
To fix errors on disks, use the Initialize and Verify
Drives process as described in
over the entire surface of each drive to identify bad
areas of the disk drives and determine read
performance. It may be run while data is passing
through the FastStream.
Running this test may negatively impact performance.
Once the Read-only test has completed, system
operation returns to normal.
To fix errors on disks, use the Initialize and Verify
Drives process as described in
Follow the instructions in
2
Click the
Read-Only Drive Test button.
3
Click
Next.
4
If no drives appear in the information box, click
on the
on the
System Scan button.
If drives are available, click on the drives you
wish to test; the drives are highlighted.
wish to test; the drives are highlighted.
5
Click
Commit.
6
A warning box appears. In the warning box,
verify that you want to complete the
configuration by clicking on
verify that you want to complete the
configuration by clicking on
Yes. Clicking on No
ends the procedure without making a change.
If you chose to do a read-only test, the
If you chose to do a read-only test, the
Drive
Performance and Health page appears
showing what tests are running and their
results. You may select other tests to run or
continue on to other tasks.
showing what tests are running and their
results. You may select other tests to run or
continue on to other tasks.