Asante Technologies 10/100 Manuel D’Utilisation
Page 2-4
Installing the Asanté PCI Adapter
This means that after power up initialization, the adapter will automatically
connect at the appropriate speed (10Mbps or 100Mbps) and/or Full Duplex
without user intervention. The Full Duplex operation can only be configured
with a hub or a switch product that supports it.
connect at the appropriate speed (10Mbps or 100Mbps) and/or Full Duplex
without user intervention. The Full Duplex operation can only be configured
with a hub or a switch product that supports it.
If you are initially planning to use the adapter to run at 10Mbps speed, when
you are ready to upgrade to 100Mbps (100BASE-TX), it will not be necessary
to modify the configuration or settings. The same driver will run in both
10Mbps or 100Mbps speed.
you are ready to upgrade to 100Mbps (100BASE-TX), it will not be necessary
to modify the configuration or settings. The same driver will run in both
10Mbps or 100Mbps speed.
Another benefit of NWay auto-negotiation is that a connection will not occur
without a common mode of operation between connecting devices.This
preserves network integrity and minimizes network downtime.
without a common mode of operation between connecting devices.This
preserves network integrity and minimizes network downtime.
Testing the Adapter
Conducting a test is recommended after performing a first time installation
of the adapter. Successful test performance ensures that the adapter is oper-
ating properly. A diagnostic program for testing the adapter is included on
the Driver Disk. This program runs a number of tests and indicates the
results with PASS or FAIL.
of the adapter. Successful test performance ensures that the adapter is oper-
ating properly. A diagnostic program for testing the adapter is included on
the Driver Disk. This program runs a number of tests and indicates the
results with PASS or FAIL.
Please refer to Chapter 4 for instructions on how to use the diagnostic pro-
gram.
gram.