Asante Technologies 10/100 Manuel D’Utilisation
Page 4-6
Troubleshooting
8
Double-click the AsantéFAST™ Troubleshooter icon or the
AsantéNIC-PCI Troubleshooter icon to start the program.
AsantéNIC-PCI Troubleshooter icon to start the program.
9
Click the OK button in the Troubleshooter startup screen.
The Troubleshooter loads and displays the main window with the
following tests:
following tests:
❏
Loopback Test verifies the operation of the network
interface circuitry and the adapter by transmitting and
receiving special packets.
interface circuitry and the adapter by transmitting and
receiving special packets.
❏
Ping-Pong Test verifies communication with another
Macintosh on the network.
Macintosh on the network.
❏
Bandwidth Utilization Test calculates the total band-
width utilization of the network.
width utilization of the network.
10
Click the checkboxes to select the Loopback Test, the Ping-Pong
Test, and the Bandwidth Utilization Test.
Test, and the Bandwidth Utilization Test.
11
Click the highlighted slot number where the adapter is installed.
12
Click the TEST button to start the test sequence.
If the Bandwidth Utilization Test is selected, press any key to stop
packet collection.
packet collection.
When the tests finish, the test results are displayed in the Trou-
bleshooter window.
bleshooter window.
13
Verify the results to make sure that all tests passed.
If a test fails, check that the adapter is seated properly in a PCI
slot or try installing the adapter in a different PCI slot and run the
tests again.
slot or try installing the adapter in a different PCI slot and run the
tests again.
14
Click the QUIT button in the Troubleshooter window or Quit
from the menu bar.
from the menu bar.
15
Select Control Panels from the Apple Menu and select AppleTalk
from the Control Panels submenu.
from the Control Panels submenu.
The AppleTalk control panel appears.
16
Click the Connect Via: dropdown list box showing available com-
munication connections.
munication connections.
17
Select the Ethernet slot number where the adapter is installed.
18
Close the AppleTalk control panel by clicking on the close box.