Compaq Infortrend Manuel D’Utilisation
Terminal Operation
7-9
The completion of array creation will be indicated by the above message
prompt.
prompt.
A controller event will then prompt to indicate the logical drive
initialization has begun. Tap [ESC] to cancel the “Notification”
prompt and a progress indicator displays on the screen as a
percentage bar.
initialization has begun. Tap [ESC] to cancel the “Notification”
prompt and a progress indicator displays on the screen as a
percentage bar.
The array initialization runs in the background while you can start
using the array or continue configuring your RAID system.
using the array or continue configuring your RAID system.
When a fault-tolerant RAID level (RAID 1, 3, or 5) is selected, the
controller will start initializing parity.
controller will start initializing parity.
Use the [ESC] key to view the status of the created logical drive.
IMPORTANT!
•
Mind that only logical drives with RAID level 1, 3 and 5 will take the time
to initialize the logical drive. Logical drives with RAID level 0 and NRAID
do not have the necessity to perform logical drive initialization; the drive
initialization will be finished almost immediately.