Canon AXIS 1650 Manuel D’Utilisation

62

AXIS 1650 User’s Manual

The print server’s firmware is stored in its Flash memory. This memory 

retains its data content even after the power is removed. Flash memory 

allows data to be erased and re-written, which is why you can install 

firmware updates in your print server as they become available, without 

having to replace any parts. New firmware can simply be loaded into the 

AXIS 1650 over the network. 

You can obtain all print server firmware free of charge from the following 

locations:
• www.axis.com
•

your local dealer

Caution!

•

To upgrade over the network using FTP you will need a file with the 
new print server firmware. The name of this file is in the form 

1650_x_xx.bin

.

•

The print server must have a valid IP address. 

Print server model: AXIS 1650

IP address of print server: 10.13.4.105

New firmware version name: 1650_2_00.bin

Location of firmware and upgrade procedure: C:\Axis 

(Create a new directory named e.g. ‘Axis’ on your hard drive and 

download the firmware to that location).

1. From www.axis.com/techsup/firmware, download the firmware and save 

it to a new directory on your computer, e.g. 

2. Open a command prompt from Start => Run. Type

 cmd in the Run Window 

and click OK.

3. The DOS Command Prompt window will open. Make sure you are working 

from the c: directory (type 

c: and press Enter). 

4. Type 

cd Axis 

Firmware is internal print server software that determines its 

functionality.

•

Be careful not to interrupt the file transfer. If the transfer is 
interrupted, the print server may have to be re-initialized by your 
dealer.

•

Before upgrading the print server, ensure that it is not printing jobs. 
You have to wait until the print job is finished before you can proceed.