Sony MSAC-PC3 Manuel
How to Use (When using Windows)
MSAC-PC3 3-078-326-12(1).US/FR
19-US
3
Delete the driver if installed.
If you use the procedure described in Step 2 and confirm that [! SONY-
Memory Stick] is shown under in the “Devices by type” display, a
separate device driver has already been installed.
Use the following procedure to delete this driver.
Do not delete other devices than [! SONY-Memory Stick].
Memory Stick] is shown under in the “Devices by type” display, a
separate device driver has already been installed.
Use the following procedure to delete this driver.
Do not delete other devices than [! SONY-Memory Stick].
1
Right-click on [! SONY-Memory Stick].
2
Click on [Remove]. The “Confirm Device Removal” screen
appears.
appears.
3
Click the [OK] button. The device is removed.
4
Restart your computer after disconnecting this unit from the
computer.
computer.
Install the Device driver again by performing the procedure from
“Connecting this unit to your computer” described on page 9.
“Connecting this unit to your computer” described on page 9.
P
Note
• If you delete other devices than [! SONY-Memory Stick] your computer
may no longer operate normally.
• The computer recognize the “Memory Stick” with different capacity as
the different divece.
• [! Sony-Memory Stick] may be displayed as the following depending on
the type of OS and the “Memory Stick” you are using.
[!Sony Memory Stick]
[!Standard IDE/ESDI Hard Disk Controller]
[!PCMCIA IDE/ATAPI Controller]
[!Sony Memory Stick]
[!Standard IDE/ESDI Hard Disk Controller]
[!PCMCIA IDE/ATAPI Controller]