Trendnet TEW-310APB Manuel D’Utilisation
4. Getting Started
For the price of a single IP Address from your Broadband Internet Service
provider you can share the Internet with all the computers on your local network,
without sacrificing speed or security, using TRENDware networking products.
provider you can share the Internet with all the computers on your local network,
without sacrificing speed or security, using TRENDware networking products.
An Infrastructure network contains an Access Point. The Infrastructure
Network example shown on the below contains the following TRENDnet
network devices:
Network example shown on the below contains the following TRENDnet
network devices:
Wireless Access Point (TEW-310APB) (DHCP enabled at default)
Ethernet Broadband Router (TW100-S4W1CA) (DHCP enabled at default)
Notebook computer with a wireless adapter (TEW-301PC)
Desktop computer with a wireless adapter (TEW-303PI)
Cable modem or DSL Modem
Ethernet Broadband Router (TW100-S4W1CA) (DHCP enabled at default)
Notebook computer with a wireless adapter (TEW-301PC)
Desktop computer with a wireless adapter (TEW-303PI)
Cable modem or DSL Modem
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol
for assigning dynamic IP addresses “automatically”. With a DHCP-
capable gateway/router, there is no need to manually assign an IP
address to each computer in the network.
for assigning dynamic IP addresses “automatically”. With a DHCP-
capable gateway/router, there is no need to manually assign an IP
address to each computer in the network.
Right out of the box, with its default settings, the TEW-310APB will
automatically connect with other TRENDnet products.
automatically connect with other TRENDnet products.
Please note: If you have a DHCP-capable router, please configure
the TEW-310APB to disable its DHCP Server and enable its DHCP
Client
the TEW-310APB to disable its DHCP Server and enable its DHCP
Client
If you need to assign IP Addresses to the computers on the network,
please remember that the IP Address for each computer must be in
the same IP Address range as all the computers in the network, and
the Subnet mask must be exactly the same for all the computers in the
network.
please remember that the IP Address for each computer must be in
the same IP Address range as all the computers in the network, and
the Subnet mask must be exactly the same for all the computers in the
network.
For example: If the first computer is assigned an IP Address of
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a Subnet
Mask of 255.255.255.0, etc.
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a Subnet
Mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
Address, one or more of the devices may not be visible on the network.
IP ADDRESS
10