Tyan Computer B2735 Manuel D’Utilisation

This chapter describes how to replace the floppy disk drive.

Follow these instructions to replace the FDD in your 
B2735G21S2 system.

1. Remove the chassis cover as described in section 2.2.1 

2. Locate the drive bay housing the slim CD-ROM drive and 

the FDD and remove power and data cables from both.

Unless you are intending to replace 

the CD-ROM drive, there is no need to 
remove the CD-ROM backplane.

3. Remove the 4 screws that secure the drive bay to the 

chassis and lift the drive bay free.

4. Remove the four screws that secure the FDD in the drive 

bay and slide the unit out of the drive bay.

The FDD bay can be used to house 

an additional IDE HDD if required.