TROY Group 802.11b Manuel D’Utilisation

◗ No additional software is needed on the system.
◗ Can be used on any system that supports web browser capabilities.
◗ Simply type the IP address into your web browser address bar to connect
◗ Default password is

ACCESS

*Both the EtherWind and the PC must be configured with an IP address and your
browser must be configured to work across a LAN in order to use WebXAdmin.

◗ A command-line oriented console  
◗ Contains features not available through WP-Admin, Xadmin32 or

WebXAdmin

◗ Default password is 

ACCESS.

◗ Can be accessed via:

• TELNET
• DEC 

NCP

• DEC 

NCL

• ULTRIX 

ccr

•  TROY XCD XConfig NetWare Utility  
• Serial 

port

• WebXAdmin

Note:    
In all cases, when you are connected, hit RETURN or ENTER to get the "#"
prompt, enter password ACCESS (it will not echo) and type anything in
response to the "Enter Username>" prompt.  When you get the "Local>" prompt,
you are ready to enter commands.

◗ HP Windows-based utility (TROY EtherWinds work transparently with

JetAdmin).  

◗ Can be downloaded from the HP web site (http://www.hp.com)

Note: The TROY EtherWind will not appear in the list of configured servers
unless TCP/IP or IPX is running on the computer.

◗ An HP utility for Windows NT Advanced Server and Windows 2000
◗ Can be downloaded from the HP web site (http://www.hp.com). 

Once it is installed, a web browser on any computer that has access to the
Windows NT/2000 server may be used to access the TROY EtherWind.

3-2