Planet Technology VC-201 Manuel D’Utilisation
23
Figure 3-3: Connecting Multiple PCs to an Ethernet LAN
Note
Please refer to your Ethernet device User’s
Manual for the device’s set up information.
Manual for the device’s set up information.
3.3 Connecting VC-202
3.3.1 Connecting Standalone IP device
Refer to the following procedures to setup the VC-202 to a
standalone PC.
standalone PC.
1. Set the VC-202 to be CO mode or CPE mode from the
DIP switch at the rear panel.
2. Power on the VC-202 by connecting its power source.
3. Power LED will illuminate.
4. Connect coaxial cable from another VDSL device to VDSL
BNC port of the VC-202.