National Instruments FP-CTR-502 Manuel D’Utilisation
323324B-01
June 2003
© 2002–2003 National Instruments Corp. All rights reserved.
FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,
the patents.txt file on your CD, or ni.com/patents.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,
the patents.txt file on your CD, or ni.com/patents.
FieldPoint Operating Instructions
FP-CTR-502 and
cFP-CTR-502
cFP-CTR-502
Eight-Channel, 16-Bit Counter Module
These operating instructions describe how to install and use the
National Instruments FP-CTR-502 and cFP-CTR-502 counter
modules (referred to inclusively as the [c]FP-CTR-502). For
information about configuring and accessing the [c]FP-CTR-502
over a network, refer to the user manual for the FieldPoint network
module you are using.
National Instruments FP-CTR-502 and cFP-CTR-502 counter
modules (referred to inclusively as the [c]FP-CTR-502). For
information about configuring and accessing the [c]FP-CTR-502
over a network, refer to the user manual for the FieldPoint network
module you are using.
Features
The [c]FP-CTR-502 is a FieldPoint counter module with the
following features:
following features:
•
Eight 16-bit counters with individual count-input terminals
•
Four gate-input channels configurable as either gates or digital
inputs
inputs
•
Four output channels configurable as either generic digital
outputs or associated outputs for the count-input channels
outputs or associated outputs for the count-input channels
•
5–30 VDC sourcing inputs and sinking outputs, compatible
with TTL devices and other 5, 12, and 24 VDC devices
with TTL devices and other 5, 12, and 24 VDC devices
•
Internal frequency references of 1 kHz and 32 kHz
•
Internally cascadable counters
•
Software-enabled 50 kHz or 200 Hz lowpass filter on
count-input channels
count-input channels
•
On/Off LED indicators
•
2,300 V
rms
transient overvoltage protection
•
Hot swappable