Omega Vehicle Security 1500 Manuel D’Utilisation

2-6     ChartView Quick Start and Tutorial

NetScan User’s Manual

•

 

ChartView Analog Meters

•

 

ChartView Digital Meters

•

 

ChartView Bar Graph Meters

 

The meter-type data displays, along with the charts, can be on your computer screen at the same time.  They
can be re-sized and repositioned as desired.  Analog, Digital, and Bar Graph meters are detailed in
Chapter 4.

 

 

 

This tutorial is intended to help you gain a good understanding of ChartView.  The tutorial is based on an

initial startup with no configuration file present

.

 

ChartView allows you to operate in one of four different Device Interface modes (IEEE 488, RS-232/422,
Network (ethernet) or Simulated Instrument), depending on your system’s scanning device.  This tutorial
makes use of the Simulated Instrument mode.  This mode provides a means of running ChartView and
inspecting its features without hardware concern.  Note that you can change the interface mode at anytime
during a configuration setup.

 

 

The arrow symbol 

◊

, followed by a number, is used throughout the tutorial to indicate an action you are to

complete.  Text without the arrow is for information content, and does not require you to take any action.

 

◊ 

(1) From Windows, start ChartView by double-clicking on the

ChartView icon.  The ChartView Startup dialog box
appears.

 

◊ 

(2) Choose the Select Device button.  The Select Interface

Dialog Box appears, as indicated in the following figure.

 

Note:  The Load File button is for loading a previously saved

configuration file.

◊ 

(3) Select Simulated Instrument.  In an actual application you

would select IEEE 488, RS-232/422, or NetWork
depending on the type of device.

Note: IEEE 488 device interface does not apply to NetScan units.