OKI 3100e Manuel D’Utilisation
English
Chapter 3 - Network Setup
17
Message display in remote printer mode
This network card temporarily stops receiving next
queue(s) while receiving a job in the NetWare Remote
Printer Mode. When this happens, the NetWare server
side handles this as temporary disconnection and a
message to that effect is sent to the client side. Once the
network card completes receiving of the current job,
however, the connection with next queue is made and
the receiving process starts normally. It is possible to
change the display interval of the message from the
NetWare server and user(s) for whom the message is
displayed. You may change the settings as you see fit.
queue(s) while receiving a job in the NetWare Remote
Printer Mode. When this happens, the NetWare server
side handles this as temporary disconnection and a
message to that effect is sent to the client side. Once the
network card completes receiving of the current job,
however, the connection with next queue is made and
the receiving process starts normally. It is possible to
change the display interval of the message from the
NetWare server and user(s) for whom the message is
displayed. You may change the settings as you see fit.
Setting from client using Windows95/98/Me NetWare
Client Service
Client Service
1.
Log in to the NetWare file server from supervisor
account.
account.
2.
Start PCONSOLE from the NetWare file server
volume at MS-DOS prompt.
volume at MS-DOS prompt.
3.
Open [Print Server Information] from [Available
Options] window.
Options] window.
4.
Select the print server for which you are changing
the notification settings from [Print Servers]
window and press Enter key.
the notification settings from [Print Servers]
window and press Enter key.
5.
Select [Print Server Configuration] from [Print
Server Information] window and press Enter key.
Server Information] window and press Enter key.
6.
Select [Notify List for Printer] from [Print Server
Configuration Menu] window and press Enter
key.
Configuration Menu] window and press Enter
key.
7.
Select the printer name for which you are
changing the notification settings from [Defined
p r i n t e r s ] w i n d o w a n d p r e s s E n t e r k e y.
Notification message is displayed to users
displayed in the window opened here. If no user
name is displayed here, no notification is issued.
To confirm or change the notification interval,
please proceed as follows.
changing the notification settings from [Defined
p r i n t e r s ] w i n d o w a n d p r e s s E n t e r k e y.
Notification message is displayed to users
displayed in the window opened here. If no user
name is displayed here, no notification is issued.
To confirm or change the notification interval,
please proceed as follows.
8.
The settings of the notification interval are
displayed in [First] and [Next] columns of the
user list opened in Step 7 above. [First] shows the
time to issue the first notice and [Next] shows the
interval of issue from one notice to the next
notice. The time is expressed in seconds.
displayed in [First] and [Next] columns of the
user list opened in Step 7 above. [First] shows the
time to issue the first notice and [Next] shows the
interval of issue from one notice to the next
notice. The time is expressed in seconds.
9.
To change the notification interval, select target
user(s) from the user list opened in Step 7 above
and press Enter key. Change [First] and [Next] to
desired times on [Notify Interval] window, press
ESC key, select [Yes] on [Save changes] window
and press Enter key.
user(s) from the user list opened in Step 7 above
and press Enter key. Change [First] and [Next] to
desired times on [Notify Interval] window, press
ESC key, select [Yes] on [Save changes] window
and press Enter key.
3100euGB.book Page 17 Friday, March 16, 2001 1:18 PM