Nortel Networks R2MFC Manuel D’Utilisation
22 Chapter 2 Overview
NN40010-300
Administration and maintenance tools
R2MFC MBM configuration involves the following:
•
Internal link configuration for the PRI internal link to the BCM. The internal link uses preset
characteristics and therefore does not require localization.
characteristics and therefore does not require localization.
•
External link configuration of the MFC-R2 E1 the external interface to public network. The
external link allows for localization in different countries.
external link allows for localization in different countries.
External link configuration is performed using the DIP switches on the front of the R2MFC MBM
or by using the CLI, which is accessed through a serial port on the faceplate of the R2MFC MBM.
Internal link configuration is performed using either Element Manager or Unified Manager. Refer
to
or by using the CLI, which is accessed through a serial port on the faceplate of the R2MFC MBM.
Internal link configuration is performed using either Element Manager or Unified Manager. Refer
to
for information on how to use the configuration
tools.
R2MFC MBM faceplate elements
The faceplate of the R2MFC MBM consists of the following elements:
•
•
•
•
•
•
illustrates the placement of these elements.
Figure 2 R2MFC MBM faceplate
120 Ω E1
RJ-48
75 Ω E1 BNC
Bantam
jacks
E1 status
4 LEDS
RJ-45
DIP
switches
MBM status
3 LEDS