Nortel Networks R2MFC Manuel D’Utilisation

50 Chapter 5 Configuring the R2MFC MBM

NN40010-300

2 Set the Config DIP switches to the appropriate country code and second dial tone setting that 

coincides with your location. 

 for predefined 

country code DIP switch settings and their specifications.

See 

 for the procedure to turn on second dial tone.

The Config DIP switch settings are divided into the following parts: 

• country or diagnostics - DIP switch 1

• country code - DIP switches 2 through 5

• second dial tone (on/off) - DIP switch 6

 shows the Config DIP switch layout.

Figure 17   Config DIP switch layout

3 Power up, or restart, the R2MFC MBM.

If the R2MFC MBM required settings are not identical to any country code, customization can be 
performed using the CLI through the serial port. Perform the following steps for configuring the 
customized country codes:

1 Set the Config DIP switches to match the country code closest to customer requirements. 

.

2 Power up or restart the BCM.

Note:  Mexico Config 1 country code is the factory default setting. It is 
the setting used if an invalid country value is set, or if a custom profile is 
selected that does not exist.

1

2

3

4

5

6

O

N